How do you set up missed call text back in GoHighLevel? · Jon Weberg

How do you set up missed call text back in GoHighLevel? The exact workflow and the text that gets replies

November 20, 2026•11 min read

Missed call text back in GoHighLevel sends an automatic text to any caller whose call goes unanswered, either from the built-in setting under Settings, Phone System, Voice, or from a workflow on the Call Details trigger. CallRail's 2025 survey of 1,000 consumers found 21% immediately call another business after a missed call (CallRail, 2025).

You pay for every call your ads, your listings and your referrals produce, and you have watched a missed call sit in the log for an hour while the caller found someone else, haven't you? This build sits under Seam 03, Lead Routing, and it gives you both versions, the exact workflow, the message that gets replies, the after hours setup, the human call back and a test you can run in ten minutes.

TL;DR

  • 21% of consumers immediately call another business after an unanswered call, and 78% have abandoned a business after one (CallRail, September 2025, 1,000 US consumers).

  • GoHighLevel's setting texts a caller once the call passes the incoming call timeout, and HighLevel recommends a timeout of 10 to 20 seconds (HighLevel help center).

  • The setting sends a text on every missed call, repeats included, so HighLevel suggests a workflow with a wait of about 20 minutes or tags to limit repeats (HighLevel help center).

Statistic or fact

Publisher

Date

Sample

Link

21% call another business right away; 78% have abandoned a business after an unanswered call; 42% leave a voicemail

CallRail

Sept 2025

1,000 US consumers

Source

Contact 100 times likelier at 5 minutes than at 30

MIT and InsideSales

Oct 2007

15,000 web leads, 100,000 call attempts

Source

Missed call text back fires past the incoming call timeout; 10 to 20 seconds recommended

HighLevel

Current help article

Product documentation

Source

Call Details trigger fires on every status change of a call

HighLevel

Current help article

Product documentation

HighLevel help center, Call Status trigger

How does missed call text back work in GoHighLevel?

When a call to your GoHighLevel number rings past the incoming call timeout without an answer, GoHighLevel counts it as missed and sends your saved text to the caller's number. Answered calls never trigger it, and contacts with DND turned on are skipped.

When someone rang your line at 12:40 while your whole team was at lunch, how many of last month's missed callers dialed a competitor before anyone checked the log? A text that lands within seconds keeps that caller talking to you while the phone is still in their hand.

Settings toggle vs workflow: which to use

Use the settings toggle when you need a single message running today with no routing. Use a workflow when you want to stop repeat texts, assign the caller to a rep, notify that rep, and create a call back task. Run one or the other, never both, or every missed caller gets two texts. Either way, the text goes out from the number the caller dialed whenever that number can send SMS.

Settings toggle

Workflow

Where

Settings, Phone System, Voice, Voicemail and Missed Call Text Back

Automation, Workflows, Call Details trigger

Message

One message for every missed call

Any message, plus follow ups

Repeat calls

Texts on every missed call

Tag or wait logic limits repeats

Rep assignment and alert

No

Assign to User, Send Internal Notification

Human call back

No

Add Task and Call actions

Best for

A same day fix

Any business that sells by phone

To switch on the toggle, open Settings, then Phone System, then Voice, open Voicemail and Missed Call Text Back, tick Enable Missed Call Text Back, click Customize, write your message, send a preview to your own phone and save, and while you are there, set the incoming call timeout between 10 and 20 seconds as HighLevel recommends. Would your team rather answer a call at the 15th second or read a text about it at the 16th?

Build the workflow step by step

Build the workflow on the Call Details trigger with Call Direction set to incoming and the status filters set to not answered, busy and voicemail. Then add a tag check, the text, the rep assignment, the alert, a reply wait and a call back task, in that order.

  1. Trigger. Add Call Details, set Call Direction to incoming, and add status filters for not answered, busy and voicemail, using the exact labels your account's dropdown shows. Since this trigger fires on every status change, the tag check below stops double texts.

  2. Settings. Turn on Allow Re-entry so a caller from last month gets a text again, and tick Stop on Response so the workflow ends the moment they reply.

  3. If Else on a tag. Check whether the contact already carries a tag such as missed call texted; if yes, end the workflow, so a caller who rings three times in ten minutes gets one text.

  4. Add Contact Tag. Add the missed call texted tag.

  5. Send SMS. Send the message from the next section.

  6. Assign to User. Pick your phone team, set Split Traffic to Equally, and turn on Only Apply To Unassigned Contacts so a known caller stays with their rep.

  7. Send Internal Notification. Alert the assigned user with the caller's name and number.

  8. Wait Step. Set it to The contact to reply, with Timeout on at 5 minutes.

  9. Add Task and Call. If no reply came, add a task for the owner and use the Call action to ring the rep and then the caller.

  10. Remove the tag. After a Wait Step of about 20 minutes, the window HighLevel's own article suggests, remove the tag so a later call starts fresh.

The text that gets a reply (with examples)

A missed call text gets replies when it comes from a named person, admits the missed call in plain words, and asks one easy question the caller can answer with a few words. Keep it under 160 characters so it arrives as a single SMS segment.

Custom values such as {{contact.first_name}} fill only when GoHighLevel already knows the caller, so the general version leaves the name out. Read your current message out loud as if you were the caller standing in your kitchen with the phone still warm in your hand, so would you type back to it, or does it sound like a machine that wants you to fill in a form? Each of these fits in one segment.

  • General: Hi, it's {{user.first_name}} at {{location.name}}. Sorry I missed your call. What can I help you with?

  • Known contact: Hi {{contact.first_name}}, {{user.first_name}} here. Just missed you. Want me to call you back in 5 minutes, or is text easier?

  • Booking focused: Sorry we missed you. Are you calling to book a time, or with a question? I can sort either one right here by text.

The after hours version

Keep the text running around the clock and move only the human call back into business hours. Place a Wait Step set to A set period of time before the call back steps, turn on Advance Window, and set Resume On and Resume Between Hours to your open days and hours.

When someone rings your number at 8:50 on a Sunday night, what would they rather read, nothing at all or a message that says when a real person will call? Write your one message so it reads true at any hour, for example "Sorry we missed you. What can we help with? If we're closed right now, you'll get a call the minute we open", and the Advance Window makes that promise true by holding the Call action and the task until your first open hour.

Want a full conversation overnight? The Conversation AI workflow action can carry the caller's reply until a human takes over at opening, the role an AI employee for lead contact plays inside a floor, and the full build is in an AI sales agent in GoHighLevel.

The call back task for a human

Every missed call that does not reply within 5 minutes gets two things: an Add Task for the assigned rep with the caller's number and a due time inside the hour, and a Call action that rings the rep first, plays a Call Whisper, and dials the caller once the rep presses a key.

Set the Call Whisper to something like "Missed caller, {{contact.phone}}, no text reply yet, press 1 to connect", so how many minutes after a missed call does your team call back today? The MIT and InsideSales study found contact odds 100 times higher at 5 minutes than at 30, which is why the call back lives inside the workflow, and setting up speed to lead in GHL uses the same pattern for form leads.

Jon Weberg built the entire custom CRM and lead routing that AI Acquisition, a $70M a year company, runs on, including how reps use it and what they say on calls, and that CRM is still running there today. When your rep closes the task, who on your team checks that the call actually happened?

How to test it before it goes live

Test the workflow from a phone that is not saved as a staff user: call your number, let it ring past the timeout, and confirm the text, the tag, the assignment, the alert and the task each appear. Then call twice more inside ten minutes to confirm only one text arrives.

  1. Confirm the number shows the A2P Verified label under Settings, Phone System, Phone Numbers, since US texts from a 10DLC number need an approved campaign linked first.

  2. Call from your test phone and let it ring out. Did the text arrive within seconds, and does it read well with no name in it?

  3. Open the contact and check the tag, the owner, the opportunity and the task.

  4. Reply to the text and confirm the workflow stopped and no call fired.

  5. Call again twice without replying and confirm one text and one task in total.

  6. Wait past your Advance Window cutoff, call once more, and confirm the call back waits for opening time.

Frequently asked questions

Why is my GoHighLevel missed call text back not working?

Check that the number has an approved A2P 10DLC campaign linked, that Enable Missed Call Text Back is ticked or the workflow is published, that the caller is not on DND, and that the call actually went unanswered past the incoming call timeout. Answered calls never trigger the text.

Does missed call text back work with call forwarding?

It works when the forwarded call goes unanswered inside GoHighLevel. HighLevel's phone settings guide says a blank or 60 second incoming call timeout sends callers to the personal voicemail on your phone, which can count as answered, while about 20 seconds sends them to CRM voicemail. Call Connect keeps voicemails from counting as connected calls, which HighLevel calls ideal for missed call text back.

How much does missed call text back cost in GoHighLevel?

The feature is included in GoHighLevel. Each text is billed as a normal SMS on your LC Phone usage at your account's rate, so the cost depends on your plan and the number of missed calls. Check your agency's rebilling settings for the exact rate.

Can missed call text back send more than one message?

The settings toggle sends one message per missed call. A workflow can send a follow up if the caller does not reply, but keep it to one follow up at most, since a missed caller who ignores two texts usually needs a phone call from a person instead.

What should a missed call text say?

Name the person texting, say you missed the call, and ask one simple question such as what the caller needs. Keep it under 160 characters, avoid links in the first message, and avoid asking the caller to fill in a form.

Is missed call text back the same as speed to lead?

Missed call text back is one piece of speed to lead that covers phone callers. Form, survey and lead ad leads need their own workflow with an instant text and a human call, which the speed to lead setup and the speed to lead guide cover.

Have it built and tested in your account

Prefer to build it yourself first? INSTALL, the $7 book, shows how to give an AI employee this one job with a written job description. If you want missed call text back, the call back task and the after hours window built and tested inside your own GoHighLevel account, alongside the rest of your lead routing, book the install call, which is free, and you'll see how many of last month's missed calls never got a reply. Every engagement carries a guarantee of 10X ROI on the fee, conditioned on proper tracking and reporting. Install My AI Seam Architect

Custom HTML/CSS
Jon Weberg

Jon Weberg

Jon Weberg is a revenue consultant, three time author and international keynote speaker who finds and closes the seams between a company's teams, the handoffs where revenue is lost. He is the founder of Profitalize and the originator of The Thirteen Seams, the AI Seam Architect and the INSTALL method for hiring AI employees. He led the campaign architecture for the Klotho Neurosciences and Greenland Mines merger announcement, which reached an investor audience of 5.1 million, served as Fractional President of a $70 million a year company, where he directed the sales, marketing and media buying directors and built the custom CRM it runs on, and has worked with Frank Kern and John Crestani.

LinkedIn logo icon
Instagram logo icon
Youtube logo icon
Back to Blog
Jon Weberg, founder of Profitalize
Written by

Jon Weberg

Founder, Profitalize · AI growth seam architect

Jon finds the handoffs where revenue leaks between your teams and installs the AI employees that own them. As Fractional President of AI Acquisition he directed its Sales, Marketing and Media Buying Directors and built the CRM a $70M a year company runs on. He is a three time published author, an international keynote speaker at Affiliate World, Traffic and Conversion Summit and Affiliate Summit, and has spent 13 years in direct response.

  • $1,790,467 in 28 business days · Tax Strategists of America
  • $41,253 in 3 days · Frank Kern
  • $270M referral revenue · NowLifestyle

About JonCase studiesLinkedInYouTube

Your next step

Find your first seam this week.

Forty five minutes on your own numbers, or the $7 book that has your first AI employee running by Friday.

Forty five minutes. We start installing your AI Seam Architect and price your three biggest seams before we hang up.